Robohand Electric Parallel Grippers
Robohand zero-maintenance electric grippers deliver faster installation, lower maintenance costs, increased reliability over traditional pneumatics grippers. Gripper open and closed operation is controlled using a discrete output from an industry standard controller such as a PLC.
Key Advantages
- Simple and fast installation, no software required
- No valves, tubing, compressor, or filters required
- Zero maintenance for maximum machine uptime
- Clean room friendly, no air contaminants
- Energy efficient reducing operation costs
- Easier to operate and control than pneumatic grippers
Clean Room Compliance
- The DPE-200-25 is suitable for a Class 6 environment as per ISO 14644-1. Certificate of Compliance (.pdf)
- The DPE-400 is suitable for a Class 5 environment as per ISO 14644-1. Certificate of Compliance (.pdf)
Additional Information
- Download the Electric Gripper Brochure (pdf)
- Contact your local DE-STA-CO sales representative for additional information about Robohand Electric Grippers
With simple plug & play operation, no programming tuning or adjusting is required. "Light Switch" simplicity in a compact design for easy setup and no external control board.
- Fast actuation (0.25 seconds up to 150 PPM), 25 mm stroke and 111N / 25 lbf grip force
- 20+ million cycles with zero maintenance and 100% duty cycle
- Electrically Acutated: 24 VDC power plus discrete input for open/close operation. "Light Switch" simplicity for easy operation
- On power loss, grip force is reduced but jaws do not separate. Finger design must retain part with method other than friction
| Part Number | CAD | Grip Force | Stroke | Weight |
|---|---|---|---|---|
| DPE-200-25 | - Preconfigured DXF & Step - Custom Configure Model | 111 N 25 lbsf | 25 mm 0.98 in | 0.53 kg 1.3 lbs |
The DPE-400 is the most durable electric gripper in the industry. With simple plug & play operation, no programming tuning or adjusting is required. "Light Switch" simplicity in a compact design for easy setup and no external control board.
- All-in-one gripper unit with built-in motor controller: No external controllers or software required
- Internal sensing detects when the motor is stalled, generating feedback signals to mimic external sensors
- Failsafe operation: grip force is diminished but jaws will not separate upon power loss.
| Part Number | CAD | Grip Force | Stroke | Weight |
|---|---|---|---|---|
| DPE-400-10 | - Preconfigured DXF & Step | 150-300 N 667-1334 lbsf | 10 mm 0.39 in | 2.52 kg 5.56 lbs |
| DPE-400-20 | - Preconfigured DXF & Step | 100-200 N 445-890 lbsf | 20 mm 0.78 in | 2.52 kg 5.56 lbs |
The RPE is an energy efficient compact gripper for delicate part handling in tight spaces and clean room operation. The small size allows multiple units to be mounted together in order to grip multiple parts simultaneously for assembly line operations.
- High Speed - 60 parts per minute
- Electrically Actuated: 24 VDC power plus discrete pulsed input for open/close operation.
- Clean Room Suitable: lubricated with Krytox(TM) grease and protected with corrosion resistant shield.
- Failsafe Operation: Spring-closed feature maintains full grip force without power.
| Part Number | CAD | Grip Force | Stroke | Weight |
|---|---|---|---|---|
| RPE-100M | - Preconfigured DXF & Step - Custom Configure Model | 5 N 1.1 lbsf | 4 mm 0.16 in | 226 g 0.5 lbs |
| RPE-101M | - Preconfigured DXF & Step - Custom Configure Model | 5 N 1.1 lbsf | 4 mm 0.16 in | 226 g 0.5 lbs |