Inspect for Air Leaks: Check all connections, hoses, and tubes for signs of wear, damage, or leaks. Listen for hissing sounds or use soapy water to detect leaks.
Verify Air Supply and Pressure: Ensure the air supply is sufficient and the pressure settings are correct. Check filters and regulators for proper operation.
Clean and Inspect the Slide Mechanism: Remove debris, lubricate moving parts, and check for wear or damage.
Evaluate Sensors and Controls: Confirm that sensors are aligned and controls operate correctly.
Test Pneumatic Actuators: Observe the actuator's movement for smoothness and inspect seals for wear.
Review Installation and Alignment: Ensure the slide is correctly aligned and securely mounted.
Consult Documentation and Support: Refer to the user manual and contact the manufacturer for assistance if needed.